Contractor choosing by code, Choosing a packing – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 21
Advertising
As it is shown in the picture below:
-
Searching for contractor by code
-
Searching for contractor by name
In order to eliminate code and name fields’ filtering, press
button.
13.2. Contractor choosing by code
Procedure:
• Enter constructor choosing by code mode according to point 13
of the manual, so you can see the following:
• Using screen keyboard, load the required contractor’s code, then
accept it pressing
button.
• Program will automatically return to the main window, displaying
the demanded contractor’s code and name in appropriate fields.
- 21 -
Advertising
This manual is related to the following products: