RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 38)

Fill in the fields according to point 19.3.1 of the manual
• In order to accept changes, press
,
• In order to refuse changes, press
.
19.3.3. Product eliminating
Procedure:
• Using product choosing by name button in the main program window
enter base of products, choose product to be eliminated, and then
according to point 19.1 of the manual press:
chosen product will be eliminated.
19.4. Contractors’ base
19.4.1. Adding a contractor
Procedure:
• Using contractor choosing by name button in the main program
window, enter contractors base, then according to point 19.1
of the manual press:
- 38 -