Choosing a packing, Choosing a packing by name, Hoosing a packing by name – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 22: Choosing a packing by code
Advertising
14. CHOOSING A PACKING
In the main application window the user can choose a packing by its code
or name as follows:
Choosing by code
- 22 -
Choosing by name
To remove a package press
.
Caution!
Packing choosing window will be accessible after setting up its profile
in the main application window, according to point 27.5.1 of the manual.
14.1. Choosing a packing by name
Procedure:
• Enter choosing a packing by name mode according to point 14 of the
manual, so you can see the following:
Advertising
This manual is related to the following products: