RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 120)

SIGNAL FROM
WEIGHING MODULE
SIGNAL FROM
TENSOMETER
NOTICE
E EKRAN
(according to the rule
of connecting shields)
REF+ - (JP1 solder)
REF- - (JP2 solder)
IN+ OUTPUT+
IN- OUTPUT-
+5V INPUT+
AGND INPUT-
• Connection of strain gauge cable shield
With connection between the
shield and the load cell body
(manufacturer feature) Without connection between
the shield and the load cell
body (manufacturer feature)
The scale with housing or
stainless connected with
the platform via cable.
POINT B POINT B
Compact mechanical
construction of the scale
(e.g. a scale with the
indicator on the pillar )
POINT B E
Point B – screwed terminal electrically connected to the housing
E – soldering point on the main board
The way of checking connection between the shield and the
tensometer body.
Use an ohmmeter for this purpose.
- 120 -