Contractor’s edition, Contractor’s elimination – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 40
Advertising
19.4.2. Contractor’s edition
Procedure:
• Using contractor choosing by name button in main program window,
enter contractors base, choose a contractor to be edited, then
according to point 19.1 of the manual press:
then the following will be displayed:
Complete the fields according to point 19.4.1 of the manual.
• In order to accept changes press
,
• In order to refuse changes press
.
- 40 -
Advertising
This manual is related to the following products: