RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 43)

complete the fields according to point 19.5.1 of the manual.
• In order to accept changes, press:
,
• In order to refuse changes, press:
.
19.5.3. Eliminating a packing
Procedure:
• Using choosing a packing by name button in the main program
window, enter packages base, choose a packing to be eliminated
and, according to point 19.1 of the manual, press:
chosen packing will be eliminated from database.
20. COUNTING PIECES
Standard software in weighing terminals PUE5 comprises an additional
working mode – counting pieces. The database of weighings holds
measurements in pieces of the same weight. If counting pieces is
performed in an additional container it needs to be tarred before
putting counting pieces into it.
20.1. Enabling working mode
Procedure:
• While in the main window press
,
• While in the operator logout window press
,
• Then press in sequence buttons:
- 43 -