RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 27)

17. LOT 2 CHOOSING
User weight for each weighing can indicate the number of LOT 2.
Procedure for defining the LOT is the same as in paragraph 16 of the
instructions.
18. QUANTITY NUMBER CHOOSING
Procedure:
In order to assign a weighting number which acts as a descriptive panel,
press the main weight of responsibility for the introduction of a quantity.
Then, with the numeric keypad enter any number.
Entered number is displayed on the button and is stored in the weighing .
- 27 -