RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 13)

• Do not load the pan with concentrated force:
• Avoid side loads, particularly side shocks should be avoided
10.1. Tarring
In order to get the net weight put the load on pan and press
when it is stable ( zero is indicated and Net symbol appears in top left
corner of weighing window).
After placing a load on the weight pan net mass will be shown. Tarring is
possible within the whole range of the scale. While tarring, remember that
the maximum capacity of scale should not be exceeded.
- 13 -