RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 131)

Installing procedure:
1. Unplug the terminal from mains;
2. Unscrew and take off the back wall of the housing;
3. Install your module in J9 on the main board;
4. Screw down the interface using 2 screws;
5. Set the DIP-SWITCH DP1 (RS485 – CF MODULES) in position OFF,
Switch settings DP1:
1 – ON
6. Set SW1 to 115,2 kbs.,
- 131 -