RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 45)

20.2. Setting reference unit mass
The reference unit mass can be set by estimating single piece mass in the
main program window using a function key attributed to this function.
Settings are described in ch. 27.5.2 of this manual.
After zeroing the platform put pieces on the pan and inscribe the quantity
in field Number of Pieces. Single piece mass is estimated automatically.
The reference unit mass can be also set in the assortment database. After
opening the window below press the button next to the mass field as shown
below.
- 45 -