Weighing platform connecting – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 119
Advertising
![background image](/manuals/466063/119/background.png)
34.1.3. Weighing platform connecting
• 6-wire strain gauge sensor platform connection
6-wire strain gauge sensor can be connected to weighing module board as
instructed below:
WEIGHING MODULE
SIGNAL
STRAIN GAUGE
SENSOR SIGNAL
NOTICE
E SCREEN
(according to the rule
of connecting shields)
REF+
SENSE +
JP1 not soldered
REF-
SENSE -
JP2 not soldered
IN+ OUTPUT+
IN- OUTPUT-
+5V INPUT+
AGND INPUT-
• 4-wire load cell cables
For 4-wire load cell cables look at the drawing below:
- 119 -
Advertising
This manual is related to the following products: