Checkweighing thresholds, Program’s options, Weighing parameters – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 55: Eighing parameters
26. CHECKWEIGHING THRESHOLDS
In the main program’s window user can see checkweighing thresholds’
results (MIN,MAX) in a bar chart
Checkweighing thresholds data is taken from database of a product or
programmed with function buttons described in point 27.5.2 of the manual.
27. PROGRAM’S OPTIONS
Procedure:
• In order to enter program’s options, user with administrator’s or
advanced authority must be logged on.
• Press
in program’s main window,
• Press:
in log off operator window ,
CAUTION!
Changes made in the options must be approved in the main window by
button options
.
27.1. Weighing parameters
Setting up basic weighing parameters.
Procedure:
• Enter program’s options according to
point 27 of the manual, then press:
- 55 -