In/out configuration, Inputs configuration – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 94
Advertising
27.7. IN/OUT configuration
For terminal equipped PUE5 derived I / O configure their operation.
Procedure:
•
Enter
Others option as instructed in point 27.5 of the manual, then
press:
27.7.1. Inputs configuration
On the input we can assign a specific function to the selected input
depending on its activation or deactivation. The assignment of the input is
activated by pressing work or until you reach the input signal. The
assignment of the work input is activated when the button is released, or
when the input signal disappears.
- 94 -
Advertising
This manual is related to the following products: