Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module User Manual
Page 56
Advertising
Publication 1734-UM011D-EN-P - May 2011
40 Configure the Adapter for Direct Connection in RSLogix 5000 Software
1. From the main menu, choose Communications>Who-Active.
The Who Active dialog opens.
2. Navigate to select the slot where the controller is located in the chassis.
3. Choose Set Project Path.
4. Choose Download.
The Download dialog opens with a reminder of the following.
• The controller is in Remote Run mode.
• The mode changes to Remote Program prior to download.
Advertising