Rockwell Automation 1734-AENT POINT I/O EtherNet/IP Adapter Module User Manual
Page 95
Publication 1734-UM011D-EN-P - May 2011
Adapter Web Pages 79
You see the Network Configuration page.
2. From the Network Configuration tab, complete these entries, noting
that values for Network Interface are disabled when DHCP is Dynamic
DHCP and port speed and duplex mode are disabled when
Autonegotiate Speed and Duplex is selected.
• For Initial Network Configuration
Ethernet Interface Configuration
– Static
– Dynamic DHCP
• For Network Interface, select from these choices.
– IP Address
– Subnet Mask
– Gateway Address
– Primary Name Server
– Secondary Name Server
– Domain Name
• For Ethernet Link, select from these choices.
Autonegotiate Status
– Autonegotiate Speed and Duplex
– Force Speed and Duplex
Select Port Speed – 10 megabits, 100 megabits
Select Duplex Mode – Half Duplex, Full Duplex
3. Click Apply Changes to save the modified values.