IKA Tube Mill control - Manual (Page 13)

13
Page
EC-Declaration of conformity 13
Explication of warning symbols 13
Safety instructions 14
Correct use 14
Unpacking 15
Useful information
15
Interfaces and outputs 16
Commissioning 17
Switching on the instrument
17
Factory setting 18
Setting menu parameters 18
Setting working parameters 19
Warning messages 20
Error codes 20
Using the coupling extractor 21
Maintenance and cleaning 21
Accessories 21
Technical data 22
Warranty 22
Contents
EN
EC-Declaration of conformity
Explication of warning symbols
Source language: German
General hazard
This symbol identifies information that is of vital importance for protecting your health
and safety. Disregarding this information may lead to health impairment and injuries.
This symbol identifies information that is of importance for the technically correct func-
tioning of the system. Disregarding this information can result in damage to the instrument or
to system components.
This symbol indicates information which is important for proper use and ensuring that the
operations of the instrument are performed efficiently and for using the instrument.
Failure to observe this information may result in inaccurate results.
Danger - Risk of hand injury.
Danger - Risk of injury by high temperature.
DANGER
DANGER
We declare under our sole responsibility that this product corresponds to the regulations 2004/108/EC, 2006/108/EC and
2011/65/EU and conforms with the standards or standardized documents: EN 61010-1, EN 6010-2-051, EN 61326-1,
EN ISO 12100 and EN 60204-1.
DANGER
CAUTION
WARNING