IKA Tube Mill control - Manual (Page 18)

18
The device is supplied with following factory setting:
Menu Settings
mode
A
max rpm 25000
timer max 03:00
language english
Working Setting
target rpm
5000
timer sec off
int sec off
Factory setting
Resetting parameters to factory setting
To reset the parameters to the factory settings, proceed
as following:
• Switch off the instrument with the mains switch (A).
• Press down the “Menu/Back” key (G) and “Timer” key
(E) simultaneously and re-start the instrument again.
• The unit is now reset to the factory settings.
Note: Above figures show specified values corresponding
to the default settings at delivery.
Setting menu parameters
Menu
Maximum rotation speed (max rpm) ……………………………………....
Timer maximum value (timer max) …………………………………….......
Operation mode mode A …………………………....
mode B ………………………........
program saved P1…………………
...
program saved P9…………………
Language english ………….………………....
中文 ……………………………....
deutsch …………………………...
français …………………………....
español …………………………....
italiano …………………………....
한국어 ………………………….....
25000 rpm
03:00 [mm:ss]
activated
-
-
-
-
activated
-
-
-
-
-
-
Factory setting
• Menu system
 After the system check screen, the working screen appears
and the instrument is ready for operation.