Replacing fixed end brackets, Replacing fixed end brackets -23 – JLG E300 Service Manual User Manual
Page 121
Advertising
SECTION 4 - BOOM & PLATFORM
3121253
– JLG Lift –
4-23
Replacing Fixed End Brackets
1. Remove the rivets the same way as shown under the
link removal instructions.
MOVE THE CABLES/HOSES OUT OF THE WAY DURING THE
GRINDING PROCESS TO PROTECT THEM. KEEP THE HOSES AND
CABLES COVERED TO PREVENT ANY DEBRIS FROM GETTING ON
THEM.
2. Parts used: Bracket Center Pin and Center Pin Snap
Ring.
Advertising