Main disassembly drawing 1 -7 – JLG E300 Service Manual User Manual
Page 41
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3121253
– JLG Lift –
3-7
NOTE: On units with a ratio 48:1, the Sun Gear (11) and the
Input Shaft (9) will need to be removed together.
10. Remove the Output Stage Carrier Sub-assembly (4)
11. Loosen and remove the three Flat Head Bolts (19)
that retain the Ring Gear (1F) to the Housing (1G).
12. Lift the Ring Gear (1F) off of the Housing (1G).
13. Remove the O-ring (18) from between the Housing
(1G) and the Ring Gear (1F).
Figure 3-4. Main Disassembly Drawing 1
1F. Ring Gear
1G. Housing
2. Washer
3. Input Carrier Subassembly
4. Output Carrier Subassembly
6. Cover Assembly
6G. Retaining Ring
7. Coupling
9. Input Shaft
10. First Stage Sun Gear
11. Second Stage Sun Gear
15. I.D. Plate
18. O-ring
19. Flat Head Bolts
Advertising