JLG E300 Service Manual - Manual (Page 19)

SECTION 1 - SPECIFICATIONS
3121253 – JLG Lift – 1-7
3. Hydraulic Tank
Lube Point(s) - Fill Cap
Capacity - 2.9 Gal. (11 L), 2.1 Gal. ( 8 L) to Full Mark
Lube - HO
Interval - Check Level daily; Change every 2 years or
1200 hours of operation.
Comments - On new machines, those recently over-
hauled, or after changing hydraulic oil, operate all
systems a minimum of two complete cycles and
recheck oil level in reservoir.
4. Hydraulic Return Filter
Interval - Change after first 50 hrs. and every 6
months or 300 hrs. thereafter.
Comments - Under certain conditions, it may be
necessary to replace the hydraulic filter on a more
frequent basis.
5. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 25.5 oz. (0.75 L)(1/2 Full)
Lube - EPGL
Interval - Check level every 3 months or 150 hrs of
operation; change every 2 years or 1200 hours of
operation
6. Wheel Bearings
Lube Point(s) - Repack
Capacity - A/R
Lube - MPG
Interval - Every 2 years or 1200 hours of operation
OIL LEVEL CH
AND FILL