2 pre-operation, Operator training and knowledge, Workplace inspection – JLG R6 User Manual

Page 12: Pre-operation -2

Advertising
background image

SECTION 1 - SAFETY PRECAUTIONS

1-2

– JLG Lift –

3121684

1.2

PRE-OPERATION

Operator Training and Knowledge

• The Operation and Safety Manual must be read and under-

stood in its entirety before operating the machine. For clari-
fication, questions, or additional information regarding any
portions of this manual, contact JLG Industries, Inc.

• An operator must not accept operating responsibilities

until adequate training has been given by competent and
authorized persons.

• Allow only those authorized and qualified personnel to

operate the machine who have demonstrated that they
understand the safe and proper operation and mainte-
nance of the unit.

• Read, understand, and obey all DANGERS, WARNINGS, CAU-

TIONS, and operating instructions on the machine and in
this manual.

• Ensure that the machine is to be used in a manner which is

within the scope of its intended application as determined
by JLG.

• All operating personnel must be familiar with the emer-

gency controls and emergency operation of the machine as
specified in this manual.

• Read, understand, and obey all applicable employer, local,

and governmental regulations as they pertain to your utili-
zation and application of the machine.

Workplace Inspection

• Precautions to avoid all hazards in the work area must be

taken by the user before and during operation of the
machine.

• Do not operate or raise the platform from a position on

trucks, trailers, railway cars, floating vessels, scaffolds or
other equipment unless the application is approved in writ-
ing by JLG.

• Before operation, check work area for overhead hazards

such as electric lines, bridge cranes, and other potential
overhead obstructions.

• Check floor surfaces for holes, bumps, drop-offs, obstruc-

tions, debris, concealed holes, and other potential hazards.

Advertising