JLG R6 - Manual (Page 28)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
2-6 – JLG Lift – 3121684
2.4 DAILY WALK-AROUND INSPECTION
Begin the “Walk-Around Inspection” at item 1, see Figure 2-1. on
page 2-7. Continue checking each item in sequence for the con-
ditions listed in the following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS “OFF”. DO NOT
OPERATE UNTIL ALL MALFUNCTIONS HAVE BEEN CORRECTED.
NOTICE
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING
THIS AREA MAY RESULT IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE
EXTENSIVE MACHINE DAMAGE.
INSPECTION NOTE: On all components, make sure there are no
loose or missing parts, that they are securely fastened, and that
no visible damage, leaks or excessive wear exists in addition to
any other criteria mentioned.
1. Frame/Chassis - See Inspection Note. Also ensure that
pothole-protection components on frame are in place,
undamaged, not bent or worn.
2. Ground Controls - Placard secure and legible, control
switches return to neutral position, emergency stop
switch functions properly. Control markings legible.
3. Hydraulic Pump/Motor, Control Valve Installation - No
unsupported wires or hoses; no damaged or broken
wires - See Inspection Note.
4. Front Wheels - Steer linkage, and Steer Cylinder - See
Inspection Note.
5. Battery Compartment - See Inspection Note.
6. Rear Wheels, Tires and Drive Motors - Properly
secured, no missing lug nuts. Refer to Section 5.7,
TIRES AND WHEELS. Inspect wheels for damage and
corrosion - See Inspection Note.
7. Manual Descent Control - See Inspection Note.
8. Beacon (if equipped) - See Inspection Note.
9. Scissor Arms, Pivot Pins and Sliding Wear Pads, Lift Cyl-
inder - See Inspection Note.
10. Platform/Handrail/Gate Installation - Deck extension
slides in and out and locks in place properly. Gate
closes and latches properly. All handrails in place and
secure - See Inspection Note.
11. Platform Control Console - Ensure that the control
console is firmly secured in the proper location. Plac-
ards secure and legible, control lever and switches
return to neutral, and emergency stop switch function
properly, required manuals in storage box.