JLG R6 User Manual

Page 20

Advertising
background image

SECTION 1 - SAFETY PRECAUTIONS

1-10

– JLG Lift –

3121684

• During operation, keep all body parts inside platform rail-

ing.

• Always post a lookout when driving in areas where vision is

obstructed.

• Keep non-operating personnel at least 6 ft. (1.8m) away

from machine during all operations.

• Under all travel conditions, the operator must limit travel

speed according to conditions of ground surface, conges-
tion, visibility, slope, location of personnel, and other fac-
tors.

• Be aware of stopping distances in all drive speeds. When

driving in high speed, switch to low speed before stopping.
Travel grades in low speed only.

• Do not use high speed drive in restricted or close quarters

or when driving in reverse.

• Exercise extreme caution at all times to prevent obstacles

from striking or interfering with operating controls and per-
sons in the platform.

• Ensure that operators of other overhead and floor level

machines are aware of the aerial work platform’s presence.
Disconnect power to overhead cranes. Barricade floor area
if necessary.

• Do not operate over ground personnel. Warn personnel not

to work, stand, or walk under a raised platform. Position
barricades on floor as necessary.

Advertising