5 function prevented – JLG R6 User Manual

Page 79

Advertising
background image

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE

3121684

– JLG Lift –

5-19

254

DRIVE & LIFT UP PREVENTED - CHAR-
GER CONNECTED

Drive or lift is not possible while the vehicle is
charging AND is configured to prevent all
motion.

• Check if the charger is connected to off board power source and disconnect if

desired.

Refer problem to a qualified JLG mechanic.

255

PLATFORM OVERLOAD

The Load Sensing System (LSS) measured
platform load is excessive.

• Remove excess weight from the platform.
• Check that platform is not caught on something, preventing up or down

movement.

Refer problem to a qualified JLG mechanic.

256

DRIVE PREVENTED - POT-HOLE NOT
ENGAGED

Driving is not possible while elevated since the
pot-hole protection system failed to deploy.

• Check for obstructions or mechanical problems around the pot-hole protec-

tion mechanisms.

• Check that the PHP switches are securely mounted.

Refer problem to a qualified JLG mechanic.

258

DRIVE & LIFT PREVENTED - BRAKES
ELECTRICALLY RELEASED FOR TOWING

Electric brake release mode is activated with
the switch in the battery box near the ground
control box. Drive or lift is not possible.

• Push manual brake release switch again or cycle power to clear manual brake

release mode.

• Check if the brake release switch is obstructed or jammed.

Refer problem to a qualified JLG mechanic.

259

MODEL CHANGED - HYDRAULICS SUS-
PENDED - CYCLE EMS

The model selection has been changed.

Refer problem to a qualified JLG mechanic.

2510 DRIVE PREVENTED - BRAKES NOT

RELEASING

There is a problem with the drive or brake sys-
tem.

• Ensure vehicle is not stuck on something preventing movement.

Refer problem to a qualified JLG mechanic.

2-5 Function Prevented

DTC

FAULT MESSAGE

DESCRIPTION

CHECK

Advertising