JLG R6 - Manual (Page 65)

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE
3121684 – JLG Lift – 5-5
Electrical System 5.3 CRITICAL STABILITY WEIGHTS
DO NOT REPLACE ITEMS CRITICAL TO STABILITY, SUCH AS BATTERIES OR
SOLID TIRES, WITH ITEMS OF DIFFERENT WEIGHT OR SPECIFICATION. DO
NOT MODIFY UNIT IN ANY WAY TO AFFECT STABILITY.
Table 5-6. Electrical System Specifications
DESCRIPTION SPECIFICATION
Electrical System Voltage (DC) 24V
Battery Charger:
Input:
AC Input Voltage:
Nominal AC Input Voltage:
Input Frequency:
Max. AC Input Current:
Ingress Protection:
Operating Temperature:
Output:
Nominal DC Output Voltage:
Max. DC Output Voltage:
Max DC Output Current:
Max. Interlock Current:
Protection:
Output Reverse Polarity:
Output Short Circuit:
AC Overload:
DC Overload:
85-265V AC
120VAC / 230VAC RMS
45 - 65Hz
12A - RMS @ 108V AC
IP46 NEMA4 Type 4
-22°F (-30°C) to 122°F (+50°C)
24V
33.6V
25A
1A
Electronic Protection-Auto Reset
Electronic Protection-Auto Reset
Current Limited
Current Limited
DC to AC Inverter - Output Rating:
(OPTION) 120V-AC, 60Hz - 7.5 Amps - 900 Watts -
Mod. Sinewave
Table 5-7. Critical Stability Weights
COMPONENT R6
Wheel and Tire Assembly (each) Front:
Rear:
9.8 kg (21.6 lb.)
9.8 kg (21.6 lb.)
Wheel/Tire and Drive Assembly (each) 51.3 kg (113 lb.)
Batteries (each) Standard:
AGM:
28.1 kg (62 lb.)
29.5 kg (65 lb.)
Batteries (combined) Standard :
AGM:
111.1 kg (248 lb.)
118 kg (260 lb.)