JLG R6 - Manual (Page 78)

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE
5-18 – JLG Lift – 3121684
2232 FUNCTION PROBLEM - DRIVE & LIFT
BOTH OPEN
The drive and lift inputs are both de-energized
in platform mode. • Check if either function is active, if Yes;
Refer problem to a qualified JLG mechanic.
2-2 Platform Controls
DTC FAULT MESSAGE DESCRIPTION CHECK
2-3 Ground Controls
DTC FAULT MESSAGE DESCRIPTION CHECK
231 FUNCTION PROBLEM - LIFT PERMA-
NENTLY SELECTED The ground control box lift switch was closed
up or down, during power-up in ground mode. • Check if the lift switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
232 GROUND LIFT UP / DOWN ACTIVE
TOGETHER The lift up / down inputs are closed simultane-
ously. • Check if the lift switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
233 FUNCTION PROBLEM - BRAKE RELEASE
PERMANENTLY SELECTED The electric brake release switch was closed
during power-up. • Check if the brake release switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
2-5 Function Prevented
DTC FAULT MESSAGE DESCRIPTION CHECK
253 DRIVE PREVENTED - CHARGER CON-
NECTED Driving is not possible while the vehicle is
charging. • Check if the charger is connected to off board power source and disconnect if
desired.
Refer problem to a qualified JLG mechanic.