JLG 10MSP Operator Manual - Manual (Page 11)

SECTION 1 - SAFETY PRECAUTIONS
3121227 – JLG Lift – 1-1
SECTION 1. SAFETY PRECAUTIONS
1.1 GENERAL
This section outlines the necessary precautions for proper and
safe machine usage and maintenance. For proper machine use, it
is mandatory that a daily routine is established based on the con-
tent of this manual. A maintenance program, using the information
provided in this manual and the Service and Maintenance Manual,
must also be established by a qualified person and must be fol-
lowed to ensure that the machine is safe to operate.
The owner/user/operator/lessor/lessee of the machine should not
accept operating responsibility until this manual has been read,
training is accomplished, and operation of the machine has been
completed under the supervision of an experienced and qualified
operator.
If there are any questions with regard to safety, training, inspec-
tion, maintenance, application, and operation, please contact JLG
Industries, Inc. (“JLG”).
FAILURE TO COMPLY WITH THE SAFETY PRECAUTIONS LISTED IN
THIS MANUAL COULD RESULT IN MACHINE DAMAGE, PROPERTY
DAMAGE, PERSONAL INJURY OR DEATH.
THE FOLLOWING INFORMATION IS PROVIDED IN ACCORDANCE WITH
THE REQUIREMENTS OF THE EUROPEAN MACHINERY DIRECTIVE
2006/42/EC AND IS ONLY APPLICABLE TO CE MACHINES:
FOR ELECTRIC POWERED MACHINES, THE EQUIVALENT CONTINUOUS
A-WEIGHTED SOUND PRESSURE LEVEL AT THE WORK PLATFORM IS
LESS THAN 70DB(A).
FOR COMBUSTION ENGINE POWERED MACHINES, GUARANTEED
SOUND POWER LEVEL (LWA) PER EUROPEAN DIRECTIVE 2000/ 14/EC
(NOISE EMISSION IN THE ENVIRONMENT BY EQUIPMENT FOR USE
OUTDOORS) BASED ON TEST METHODS IN ACCORDANCE WITH
ANNEX III, PART B, METHOD 1 AND 0 OF THE DIRECTIVE, IS 109 DB.
THE VIBRATION TOTAL VALUE TO WHICH THE HAND-ARM SYSTEM IS
SUBJECTED DOES NOT EXCEED 2,5 M/S2. THE HIGHEST ROOT MEAN
SQUARE VALUE OF WEIGHTED ACCELERATION TO WHICH THE
WHOLE BODY IS SUBJECTED DOES NOT EXCEED 0,5 M/S2.