JLG 10MSP Operator Manual - Manual (Page 62)

SECTION 3 - MACHINE OPERATION
3-34 – JLG Lift – 3121227
3.14 PLATFORM HANGER ACCESSORY - (OPTION)
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLAT-
FORM MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPAC-
ITY.
DO NOT USE MORE THAN ONE ACCESSORY MOUNTED ON THE SAME
SIDE OF THE PLATFORM AT ANY TIME.
NOTE: This hanger accessory is intended for use in placing or
retrieving lightweight bulky stock items such as bicycles,
ladders, etc., on racks or shelves above ground level. Use
for any other purpose is not authorized by JLG.
The hanger accessory is a pivoting arm mounted to the 10MSP
platform rail. The hanger accessory can be mounted to either side
of the platform individually, or two can be mounted, one on each
side of the platform. Each individual hanger has a maximum load
capacity of 50 lb. (23 kg).
The hanger arm can be pivoted out of the way parallel with the
platform side rails when not in use, (the stowed position). The
hanger arm is pinned into position at 90 degrees to the platform
side rails when in use, (the carry position).
1. Mounting Bracket/Capacity
Decal (a)
2. Lock Pin (Stowed Position)
3. Lock Pin (Carry Position)
4. Hanger Arm (Stowed Position)
5. Hanger Arm (Carry Position)
6. Hanger Arm Strap
NOTE: (a) Maximum load capacity of hanger is 50 lb. (23kg).
1
3
4
5
6
2