JLG 10MSP Operator Manual - Manual (Page 76)

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
5-2 – JLG Lift – 3121227
5.2 GENERAL SPECIFICATIONS
Machine Specifications
SPECIFICATION 10MSP
Gross Machine Weight:
(Platform Empty): 1100 lb.
(499 kg)
Machine Height:
(Platform Stowed): 57 in.
(1.44m)
Maximum Ground Bearing Pressure:
(per wheel)
2 x 12 VDC Batteries: 650 lb. (295 kg)
4 x 6 VDC Batteries: 710 lb. (322 kg)
Machine Ground Clearance: 1.875 in.
(47.6mm)
Machine Turning Radius:
(Circle) 65 in.
(165cm)
Tilt Indicator Setting: 1.5°
Maximum Travel Grade (Gradeability):
(Platform STOWED ONLY)
15% (8.5°)
Maximum Travel Grade (Side Slope):
(Platform STOWED ONLY)
5°
Maximum Drive Speeds:
(Operator Variable): 0.5 - 3.4 mph
(0.8 - 5.5 kph)
Machine Base - Overall:
(Width x Length) 29.5 in. W x 60 in. L
(75 cm W x 152 cm L)
Maximum Operating Wind Speed: ANSI/CSA: 28 mph (12.5 m/s)
(For indoor use only) - CE/AUST: 0 mph (0 m/s)
Maximum Horizontal Manual Side Force:
(Platform fully extended with Maximum load)
ANSI/CSA:
CE/AUST/JPN:
100 Lbs. (445 N)
200 N (45 Lbs.)
Maximum Hydraulic System Pressure:
(Recommended initial setting) 1800 PSI
(124 Bars)
Hydraulic System Capacity: 5 qts. U.S. (4.7 L)
Hydraulic Reservoir Capacity: 1 Gallon (3.78 L)
SPECIFICATION 10MSP