Hanging a rug, Hanging a rug -36 – JLG 10MSP Operator Manual User Manual
Page 64
SECTION 3 - MACHINE OPERATION
3-36
– JLG Lift –
3121227
Hanging a Rug
The following is a description for use of the Rug Carrier accessory
in hanging rugs on horizontal pivoting arm display racks.
1. Select the intended location in the display for mounting the
rug. Open the display rack to provide adequate space for the
lift and rug.
2. With the Rug Carrier Accessory arms stowed, drive the lift
into position prior to loading the rug.
3. Release and lock Rug Carrier Accessory arms into the carry
position.
4. Load the rolled rug with the finished side facing the platform.
As required, use an assistant to load the rug onto the Rug
Carrier Accessory arms.
5. Make sure that the rug is centered over its length on the Rug
Carrier Accessory.
6. Elevate the platform to the required height for mounting the
rug onto the display arm.
7. Properly attach the rug to the display arm. Never climb onto
the platform rails for any reason.
1. Rug Carrier arms shown in the extended or carry position.
NOTE: Maximum combined carrying capacity for both arms is 50 lb.
(23kg)
1