JLG 10MSP Operator Manual - Manual (Page 68)

SECTION 3 - MACHINE OPERATION
3-40 – JLG Lift – 3121227
3.16 FLOURSCENT TUBE CADDY - (OPTION)
NOTE: The fluorescent tube caddy accessory is intended for use
in replacing fluorescent tubes in light fixtures mounted at
ceiling level. Use for any other purpose is not authorized
by JLG. Maximum carrying capacity of caddy is 15
lb.(7kg)
The fluorescent tube caddy consists of the caddy which attaches
to the platform side rail. The caddy mount is secured to the plat-
form rail with an attach pin. The caddy can be mounted to either
side of the platform dependent on other attachments already
mounted to the platform rail.
Pre-Start Inspection
Prior to use of the Fluorescent Tube Caddy, check the following;
• Caddy mount is centered and secure to the platform rail.
• The caddy lock pin is in place under the platform rail and
secure.
THIS MACHINE IS NOT INSULATED AND DOES NOT PROVIDE PROTEC-
TION FROM CONTACT OR PROXIMITY TO ELECTRICAL CURRENT.
THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE FLUORESCENT TUBE CADDY MUST NOT
EXCEED THE MAXIMUM LOAD CAPACITY OF THE PLATFORM.
1. Fluorescent Tube Caddy 2. Attach Pin and Retaining Wire
NOTE: Caddy maximum carrying capacity is 15 lb. (7kg)