JLG 10MSP Operator Manual - Manual (Page 27)

SECTION 2 - PREPARATION AND INSPECTION
3121227 – JLG Lift – 2-9
sole. (Australian Spec machines also include a
platform gate lock/release lever mechanism on
top of each gate that must be pressed down to
open the platform gate. Check that the lock/
release on each gate is latching properly when
gate is closed, and releasing when the handle
lever is depressed.)
• Platform Joystick Enable and Footswitch
Enable - The machine will not operate (drive or
lift) unless both of these switches are pressed
and held during drive or lift operation.
d. Ensure all machine functions are disabled when the
Emergency Stop Button is activated (pressed in).
Platform Gate Lock/Release Lever
(Australian Spec Machines Only)