10 platform configuration, Platform lanyard anchorage point, 10 platform configuration -27 – JLG 10MSP Operator Manual User Manual
Page 55: Platform lanyard anchorage point -27, Standard platform (10msp) -27, Platform maximum capacity -27
SECTION 3 - MACHINE OPERATION
3121227
– JLG Lift –
3-27
3.10 PLATFORM CONFIGURATION
Platform Lanyard Anchorage Point
Attach fall restraint lanyard to lanyard anchorage point on lower
platform railing. Maximum allowable lanyard length is 30 in.
(76cm).
JLG INDUSTRIES, INC. RECOMMENDS THAT THE OPERATOR UTILIZE A
FALL RESTRAINT SYSTEM IN THE PLATFORM WITH A MAXIMUM 30
INCH (76 CM) LANYARD ATTACHED TO AN AUTHORIZED LANYARD
ANCHORAGE POINT.
Table 3-3. Platform Maximum Capacity
SPECIFICATION
MAXIMUM CAPACITY
Max.
Wind
Speed
Platform
Load
Material Tray
Load
Carry
Deck
ANSI/CSA
350 lb.
(160kg)
250 lb.
(115kg)
250 lb.
(115kg)
28 mph
(12 m/s)
CE
(Indoor Use Only)
0 m/s
Australia
(Indoor Use Only)
0 m/s
Figure 3-9. Standard Platform (10MSP)
1. Operators Platform
2. Platform Load (Operator)
3. Platform Swing-In Entry Gate
4. Material Handling Tray
5. Storage Hook
6. Ext. Cord Wrap Hooks
7. Lanyard Attach Point
8. Carry Deck - Hood