JLG 10MSP Operator Manual - Manual (Page 52)

SECTION 3 - MACHINE OPERATION
3-24 – JLG Lift – 3121227
Drive Speed Setting Controls
NOTE: When the platform is elevated, the maximum drive speed
is automatically cut-back to 25%. The Ground Control
Module-LCD screen will display a turtle when in this
mode, See page 3-13 - Machine LCD Status Display in
this section of the manual.
Drive Speed Indicator
Drive Speed Setting
Selector Switch
1. Selector Switch (on
top of joystick)
Each PRESS on this
side of the switch will
DECREASE maximum
drive speed.
(LESS LEDs Lit up on
the Drive Speed Indi-
cator.)
Each PRESS on this
side of the switch will
INCREASE maximum
drive speed.
(MORE LEDs Lit up on
the Drive Speed Indi-
cator.)
1