Section 2. preparation and inspection, 1 personnel training, Operator training – JLG 10MSP Operator Manual User Manual
Page 19: Section - 2 - preparation and inspection, 1 personnel training -1, Operator training -1
SECTION 2 - PREPARATION AND INSPECTION
3121227
– JLG Lift –
2-1
SECTION 2. PREPARATION AND INSPECTION
2.1 PERSONNEL TRAINING
The aerial platform is a personnel handling device; so it is neces-
sary it be operated and maintained only by trained personnel.
Persons under the influence of drugs or alcohol or who are subject
to seizures, dizziness or loss of physical control must not operate
this machine.
Operator Training
Operator training must cover:
1. Use and limitations of the controls in the platform and at
the ground, emergency controls and safety systems.
2. Control labels, instructions, and warnings on the
machine.
3. Rules of the employer and government regulations.
4. Use of approved fall protection device.
5. Enough knowledge of the mechanical operation of the
machine to recognize a malfunction or potential mal-
function.
6. The safest means to operate the machine where over-
head obstructions, other moving equipment, and obsta-
cles, depressions, holes, drop-offs are present.
7. Means to avoid the hazards of unprotected electrical
conductors.
8. Specific job requirements or machine application.