JLG 10MSP Operator Manual - Manual (Page 50)

SECTION 3 - MACHINE OPERATION
3-22 – JLG Lift – 3121227
Multifunction Joystick Control
The joystick operates the following machine functions:
• Drive/Steer
• Lift Up and Down
NOTE: Use the Drive/Lift Mode Selector Switch to select which
function the joystick will operate.
The selected operating mode will only remain active for 5
seconds if the function is not operated.
Remember to press and hold both the joystick function
enable lever and platform function enable foot switch
simultaneously in order to operate any joystick functions.
SEE Figure 3-1. on page 3-2 FOR GRADE AND SIDESLOPE DRIVING
DESCRIPTION WHEN DRIVING WITH THE PLATFORM LOWERED
(STOWED).
WHEN THE PLATFORM IS ELEVATED DRIVE ONLY ON A SMOOTH,
FIRM, AND LEVEL SURFACE.
Drive Mode
1. Activate the Drive Mode
using the Drive/Lift
Mode Selector switch.
Within 5 seconds of
activation - Simulta-
neously ENGAGE
and HOLD both the
JOYSTICK ENABLE
LEVER and the
FOOTSWITCH
ENABLE then move
the joystick in the
desired direction of
travel. Drive power is
applied proportion-
ally the further the
joystick is moved off
center.
1