Activating programming mode, Activating programming mode -13 – JLG 10MSP Operator Manual User Manual
Page 87
SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121227
– JLG Lift –
5-13
Activating Programming Mode
NOTE: If machine does not power up, check that both the
Ground Control Station - Emergency Stop Button, and the
Platform Control Console - Emergency Stop Button, are in
the RESET position.
Also if machine is equipped with the (PSL) Programmable
Security Lock option, see Section 3 of this Operators
Manual for additional machine power-up steps.
Activating Programming Mode
1. With machine power OFF, press and hold the Brake Release
Button (1) on the Ground Control Station.
2. While holding the Brake Release Button in, power machine up
by turning the Main Power Selector Switch (2), to either the
Ground Control or Platform Control Mode.
3. Release the Brake Release Button (1) after machine is pow-
ered up. The LCD display should now display five zeros, one
with a box around. Continue to next step Entering Password.