2N VoiceBlue Lite - Manual v2.6 - Manual (Page 53)

2N - VoiceBlue Lite
the quick forwarding character (default value #) and then dials the
telephone number of subscriber B. He terminates the selection
with the character of end of dialling (default value #). After the
VoiceBlue receives the character of the end of selection, it
terminates the call between A and C and attempts to make a call
between the subscribers A and B. Subscriber A then receives a
ring tone.
1
2 #123#
3
A = 111
B = 123
C
Fig.22 - Service mobility extension function quick forwarding
6.4. Recording announcements for mobility extension
Announcements for mobility extension can be recorded using the
configuration program (see chapter 9.4) or using AT orders and the
protocol X-modem shown below. Announcements of mobility
extension are recorded only for subscribers who have this service
activated (see chapter). The function mobility extension uses the
list of announcements shown in Tab. 4 - list of announcements of
service Mobility extension
1.
43