2 composer elite sensor control unit – INFICON Composer Elite Gas Concentration Monitor User Manual

Page 23

Advertising
background image

1 - 9

PN

07

4-

56

6-

P1

B

Composer Elite Operating Manual

1.5.2 Composer Elite Sensor Control Unit

Size H x W x D . . . . . . . . . . . . . . . . . 132.8 x 213.4 x 254 mm

(5.23 x 8.4 x 10.0 in.)
3U Half Rack

Measurement Channels . . . . . . . . . . Up to 5 Acoustic Sensors supported with

1 Sensor Control Unit

Required Connector Clearance . . . . 76.2 mm (3 in.) at rear panel for electrical

connector removal or insertion

Rack Mount . . . . . . . . . . . . . . . . . . . Optional;

Full Rack Extender, PN 782-900-007

Weight . . . . . . . . . . . . . . . . . . . . . . . Approximately 3.0 kg (6.6 lb.)

Operating Temperature Range. . . . . 20 to +50°C (68 to 122°F)

Storage Temperature Range . . . . . . -10 to +70°C (14 to 158°F)

Humidity Range . . . . . . . . . . . . . . . . 0 to 80% RH non-condensing

Power Switch . . . . . . . . . . . . . . . . . . Rear panel mounted circuit breaker

rated at 7.5 A

Power Requirements . . . . . . . . . . . . 24 V(dc), 150 watts

Display . . . . . . . . . . . . . . . . . . . . . . . TFT LCD

Front Panel Keys . . . . . . . . . . . . . . . Six buttons for screen selection

Control Knob . . . . . . . . . . . . . . . . . . For parameter selection and editing

Rotate for parameter selection.

Rear Panel Connectors . . . . . . . . . . Ground stud, power connection, 15-pin

high-density D-sub connectors to sensor
cards, 9-pin D-sub connector for RS-232C
and M12x1 round connector for DeviceNet
communications

Cleaning . . . . . . . . . . . . . . . . . . . . . . The casing can be safely cleaned with a mild

detergent or spray cleaner designed for that
purpose. Care should be taken to prevent
any cleaner from entering the unit

Regulatory Compliance . . . . . . . . . . Certified to CE standards, RoHS compliant,

& compliant to DeviceNet standards

Interconnect Cable . . . . . . . . . . . . . . 4.6 m (15 ft.) length, 15-pin high-density

D-sub connector on each end

Advertising