4 status commands – INFICON Composer Elite Gas Concentration Monitor User Manual
Page 96
Advertising
5 - 30
PN
07
4-
56
6-
P1
B
Composer Elite Operating Manual
5.6.4 Status Commands
Message = S <Command ID>(<Sensor>)(<Temperature Zone>|<Heater ID>)
Command ID = <Byte> See Command ID in
.
Sensor = <Byte>1-5. Use 0 for Command S7.
(Temperature Zone) = <Byte> 1-2 Used only with Command S1. 0 if unused.
(Heater ID) = <Byte>1-2 Used only with Command S3. 0 if unused.
Response = <Byte>|<Float>|<Encode>|<Short>| See Data Range & Type
columns in
Advertising