Leica Biosystems VT1200/VT1200 S - Manual (Page 48)

46 Instructions for Use V 1.4 RevC – 09/2013
• Remove the fuse housing on the right side of the instrument above the
power switch. To do so, push an appropriate tool (small screwdriver) into
the slots on the left and right (Fig. 35a) and carefully pull it out.
7. Malfunctions: Meaning and Troubleshooting
• Reinsert the fuse housing into the holder on the
instrument as shown in Figure 35b and gently
push it in until you hear it click into place.
• Remove the defective fuse and replace it with
the replacement fuse included in the standard
scope of delivery ( see Fig. 35c ).
35a 35b
35c
Caution:
Always unplug the power supply before replacing the fuses!
7.2 Replacing the main fuse
Fig. 35