Leica Biosystems CM1510-S - Manual (Page 40)

40 Instruction manual V 1.4 – 04/2010
8. Cleaning and maintenance
To switch the automatic circuit breaker back
on after is has been activated:
• Wait approx. 5 minutes (the automatic cir-
cuit breaker can be switched back on only
after it has cooled).
• Switch the circuit breaker back on flipping
it to the upper position.
Fig. 26
If the automatic circuit breakers
cannot be switched back on or if
they are activated several times, call
Leica technical service!
8.2 Automatic circuit breaker
The automatic circuit breaker (mains fuses) is also used as mains
switch and is located on the right side wall of the cryostat housing - see
Fig. 26, left.
The value indicated will correspond to the voltage of your instrument.
¤