Lenze E84AYCPM - Manual (Page 12)

Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17
12
2 Safety instructions
2.2 Device- and application-specific safety instructions
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2.2 Device- and application-specific safety instructions
• During operation, the communication module must be firmly connected to the standard device.
• Only use cables corresponding to the given specifications.
 Bus cable specification ( 28)
2.3 Residual hazards
Protection of persons
If the Inverter Drives 8400 are used on a phase earthed mains with a rated mains voltage ≥ 400 V,
protection against accidental contact is not ensured without implementing external measures.
 Protective insulation ( 16)
Device protection
The communication module contains electronic components which may be damaged or destroyed
by electrostatic discharge.
 Installation ( 21)

Documentation for the standard device, control system, plant/machine
All other measures prescribed in this documentation must also be implemented.
Observe the safety instructions and application notes specified in the documentation.