8 process data transfer, 1 access to process data / pdo mapping, Process data transfer – Lenze E84AYCPM User Manual
Page 45: Access to process data / pdo mapping, 8process data transfer
8
Process data transfer
8.1
Access to process data / PDO mapping
45
Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8
Process data transfer
8.1
Access to process data / PDO mapping
The process data (MCI-PDOs) are transferred via the MCI interface.
• A maximum of 16 words for each direction is exchanged.
• The process data are accessed via the LP_MciIn and LP_MciOut port blocks. These port blocks are
also referred to as process data channels.
• The port/function block interconnection of the process data objects (PDO) takes place via the
Lenze »Engineer«.
[8-1]
External and internal data transfer between the bus system, inverter, and function block interconnection
Note!
PDO mapping and the objects required for this purpose are not supported in the
software version 01.00 of the E84AYCPM communication module.
/3B0FL,Q
"
E&WUOB%
E&WUOB%
Z&WUO
E,QB%
E,QB%
Z,Q
Z,Q
GQ,QBS
/3B0FL2XW
E6WDWHB%
E6WDWHB%
Z6WDWH
E2XWB%
E2XWB%
Z2XW
Z2XW
GQ2XWBS
"
)LHOGEXV
$SSOLFDWLRQ
)%LQWHUFRQQHFWLRQ
&RPPXQLFDWLRQPRGXOH
0&,LQWHUIDFH