Lenze E84AYCPM - Manual (Page 95)

13 Parameter reference
13.1 Parameters of the communication module
95
Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
13 Parameter reference
This chapter supplements the parameter list and the table of attributes contained in the software
manual and in the »Engineer« online help for Inverter Drives 8400 by the parameters of the
E84AYCPM communication module (PROFIBUS).
13.1 Parameters of the communication module
This chapter lists the parameters of the E84AYCPM communication module (PROFIBUS) in
numerically ascending order.
C13850
C13851

Software manual/»Engineer« online help for Inverter Drives 8400
Here you can find general information on parameters.
Parameter | Name:
C13850 | All words to master
Data type: UNSIGNED_16
Index: 10725
d
= 29E5
h
Display of the process data words transferred from the communication module to the PROFIBUS master.
In subcodes 1 ... 16, all process data words to the master are displayed. Only the process data words configured are
valid.
Display area
(min. value | unit | max. value)
0 65535
Subcodes Info
C13850/1
...
C13850/16
; Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C13851 | All words from master
Data type: UNSIGNED_16
Index: 10724
d
= 29E4
h
Display of the process data words transferred from the PROFIBUS master to the communication module.
In subcodes 1 ... 16, all process data words to the master are displayed. Only the process data words configured are
valid.
Display area
(min. value | unit | max. value)
0 65535
Subcodes Info
C13851/1
...
C13851/16
; Read access Write access CINH PLC-STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT