7 wiring of the feedback system, 1 important notes, Wiring of the feedback system – Lenze EVF9338 User Manual
Page 99: Important notes
Advertising
Electrical installation
Wiring of the feedback system
Important notes
l
99
EDKVF9338 DE/EN/FR 4.0
5.7
Wiring of the feedback system
5.7.1
Important notes
ƒ
An incremental encoder can be connected to input X8 or input X9:
– Incremental encoders with TTL level are connected to X8.
– Incremental encoders with HTL level are connected to X9.
ƒ
The incremental encoder signal can be output for slave drives at the digital
frequency output X10.
)
Note!
ƒ
We recommend to use Lenze system cables for wiring.
ƒ
For self−made cables only use cables with shielded cores twisted in pairs.
Advertising
This manual is related to the following products: