Lenze ETC Motion Control - Manual (Page 236)

Machine constants
List of machine constants
4
4.16
l
236 EDSTCXN EN 2.0
2,
2,
2,
2;
MK_T_BESCHL 0, /* damping time constant for acceleration ramps */
0, /* and deceleration ramps [ms] */
0,
0,
0,
0;
MK_SPINDELMAX 6000, /* spindle speed in [rpm] at 10 V */
6000,
6000;
/* −−−−−−−−−−−−−−−−−−−−−−− */
/* path−related limit values */
/* −−−−−−−−−−−−−−−−−−−−−−− */
MK_VBAHNMAX 20; /* 20 max. material speed [m/min] */
MK_BAHNBESCHL 2; /* acceleration ramp [m/sec 2 ] */
MK_BAHNBREMS 2; /* deceleration ramp [m/sec 2 ] */
MK_T_BAHNBESCHL 0; /*damping time const. deceleration/acceleration ramps [ms]*/
/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/
/* 4. Setting additional tabs */
/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/
MK_MESS_AUFLOESUNG 1.0, /* resolution of the analog measured values [mm/V] */
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0,
1.0;