Lenze ETC Motion Control - Manual (Page 291)

ETC−MMI
Operating ETC−MMI
Help function
7
7.3
7.3.3
l
291 EDSTCXN EN 2.0
These function keys open a submenu; i.e. they change the labelling and thus
the meaning of other keys. The labelling of this function key type always
ends with three dots.
ETCN066
Use the <Back> function key to change back to the calling key level.
7.3.3 Help function
Use the shortcut <CTRL>+<SHIFT>+<any F key>to start the online help.
7.3.4 Configuration file
The configuration file "delphmmi.ini" contains settings which are required
for operating the MMIs. It may only be changed by trained personnel. Further
information (
¶ 327).
7.3.5 Language switch
All texts of the user interface are saved in an ASCII file, which can be changed
with any editor. This way, the texts can be individually adapted or translated
into foreign languages (if the characters can be displayed). The language file
is set in the configuration file "delphmmi.ini". Further information (
¶ 321).
Showing a new softkey line
(submenu)