Lenze ETC Motion Control - Manual (Page 306)

ETC−MMI
"Programming" operating mode
ASCI editor
7
7.6
7.6.1
l
306 EDSTCXN EN 2.0
This dialogue box is used, among other things, for the selection of a program
for the editor and for the transfer to an NC computer.
Pathname Display filter Cursor keys
Display profile
of the program ESC
discard entry
ENTER
select file
ETCN076
ƒ A dialogue box (button, input field, selection list etc.) can be selected
with the <TAB> key.
ƒ By means of the <Cursor> keys, you approach an element in the
selected dialogue area (e.g. a certain file in the file selection area).
ƒ With the <Enter> key, you execute an action. With <ESC>, you cancel
the action.
1. Press the <TAB> key several times, until the display and input field of
the directory name is selected.
2. If you want to change the file path, press <Enter> and enter a new
path. Press <Enter> to confirm the entry or <ESC> to discard it.
3. Press the <TAB> key several times until the file selection field is
selected.
4. Select the file by means of the <Cursor> keys. Press <Enter> to select
the file.
Dialogue box for file selection
General functions
Select file