Lenze ETC Motion Control - Manual (Page 79)

Getting started
Operation via a Lenze−HMI
Settings for the connection of a Lenze−HMI H505
2
2.15
2.15.1
l
79 EDSTCXN EN 2.0
The object directory is the interface between the codes in the HMI H505 and
the HEX indexes in the ETC. According to the Lenze standard, the following
relationship exists:
INDEX =DEZ_TO_HEX(24575 code)
To facilitate this conversion, an Excel table is available (Umrechnung
Objektverzeichnis Schulung.xls). It is located on the ETC−CODeSys CD in the
directory "Systemhandbuch". In this file, the declaration and the
distribution of the HMI variables to the codes can be made.
ETCN045
The part highlighted in yellow can be copied completely to the object
directory of CoDeSys by means of <Ctrl>+<C>.
Object directory (Variable tab):
ETCN046
Please pay special attention to the dot before the variable.
CoDeSys object directory